Sunday, March 20, 2011

How to Refill an Inkjet Cartridge

Refilling an inkjet cartridge is not as difficult as it appears in case,granted you follow a few simple steps. It is prominent first to remember that you must never overfill your printer inkjet cartridge, and/or if you think a cartridge is leaking, you should never put it into your printer.

pen refill

First of all you will need to purchase an ink refill kit. This can be done online for fairly cheap or if you need it immediately, you can get one at your local office supply store. The ink refill kit is ordinarily not that expensive to buy, and inspecting the price of ink cartridges you will no doubt allinclusive save money. To add to the list, you will also need a roll of paper towels or newspaper. It is also best to use a flat covering when you are refilling your printer inkjet cartridge.

Pen Refill

Once you have all things prepared, take the empty ink cartridge out of your printer. It is probably best at this point to wear some disposable gloves as sometimes the ink can be messy, and not all the time easy to take off from your hands. Most citizen who do this for the first time without gloves ordinarily end up with some on their hands.

At this point get a consolidate of paper towels or newspaper, so that you have a thickness to catch any ink that may leak, and place the empty cartridge on the it. It is all the time good to read the instructions that came with the ink refill kit before starting. There may be some definite differences for distinct types of inkjet cartridges.

Once you are satisfied, take the next step and find the holes on top of the cartridge, ordinarily these are assuredly found if you rub your fingers over the label. Try to find something sharp like the tip of a pencil or even a ballpoint pen and pierce the refill holes of the inkjet cartridge. Remember, when filling your cartridge that besides black there are also three other colors; yellow, cyan and magenta. It is at this stage that you must take great care to put the proper color in the correct hole; you could all the time use a toothpick to insert into the holes to recognize colors if you are not sure. It is no fun if you put the wrong color in the wrong hole; you would end up printing some very strange family photos.

If you are sure you have found the correct hole you can now insert the needle of the refill ink into the hole. Add the ink moderately production sure you don't over fill. If you see any ink oozing out don't let go of the bottle but moderately issue the air which will suck a dinky ink back out of the cartridge before removing completely. You should not have to seal the refill holes due to the breather holes that are already on the top of the inkjet cartridge. Check to make sure no ink is leaking from the hole as you do not one ink color running into another color.

Once you are done, you can put unused ink back in their proper bottle. It is prominent to make sure you clean out the syringes with water. Most citizen like to label their syringes with the color that was used. Replace your inkjet cartridge back into the printer and run the print head cleaning cycle a consolidate of times and you should be ready for printing!

How to Refill an Inkjet Cartridge

Pen Refill